Double Layer Roof Sheet Roll Forming Machine Shipment to Brazil
Seven double layer roof sheet lines in seven containers for a Brazilian customer, forming 0.6-0.8 mm sheet from coils up to 1250 mm wide.
- Delivery January 2020
- Shipment 7 x 40ft containers
- Sets 7 lines
- Profile Double layer roof sheet
- Thickness 0.6 - 0.8 mm
- Coil width up to 1250 mm
Project background
What this line was built for
Recorded at the time of the order. For full machine specifications, see the model page linked below.
Seven containers of double layer roof sheet roll forming machine, total 7 sets was loaded today for shipment to Brazil. The machine is used to produce roof sheet, with thickness 0.6-0.8mm, coil width 1250mm Maximun.
Machine in this project
The line used for this order
Specifications, options and tooling scope for this machine family — including the configuration this customer ordered.
How a project runs
The same four stages, every order
-
01
Profile and coil review
We start from your section drawing and coil specification — developed width, thickness range, material grade — and confirm line speed, cutting method and automation level before quoting.
-
02
Factory test run
Every line is assembled and run on production material in our Wuxi workshop. Cut length, section tolerance and line speed are checked against the order, and the run is recorded for the customer.
-
03
Export packing
Modules are separated, protected and packed in wooden crates; the hydraulic station and control cabinet travel separately. We prepare the packing list and documentation set for your forwarder.
-
04
Installation and training
Our engineers can travel to site to assemble and align the line, run trial coils and train operators. Afterwards we stay available for remote support and spare parts.
Next step
Need a line like this one?
Send your section drawing, material and thickness, the output you need per shift and where the line will be installed. We will come back with the line configuration, tooling scope and delivery schedule — usually within one working day.
Or check the machine family on the product page.